Husky H4860HSG Instalační příručka stáhnout pdf

5 HUSKYTOOLS.COM

Please contact 1-888-43-HUSKY for further assistance.

Installation

Cleaning the air hose

□ A 1/4 in. air hose is required, with a maximum length of

25 ft.

□ Clean the air hose of accumulated dust and moisture

before connecting it to the air supply.

NOTE: If a longer air hose is required, connect a 3/8 in. air

hose to the 1/4 in. air hose to ensure the spray gun has the

necessary air supply.

Connecting to the air supply

□ Always use clean dry air. Excessive moisture and dirt will

greatly reduce the life of any air motor. We recommend the

installation of an in-line ﬁlter-regulator as close to the tool

as possible.

□ Ensure all hoses and ﬁttings are the correct size and

secured tightly.

WARNING: Lubricators should not be used with spray

guns. The use of an in-line lubricator will damage the paint

ﬁnish.

Recommended Air Line Set-Up

Ref. Description

1 Hopper Gun

2 Regulator

3 Quick Plug

4 Quick Coupler

5 Air Hose

6 In-line Filter

7 Air Compressor

5 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.Installation1 Cleaning the air hose □ A 1/4 in. air hose is required, with

Další dokumenty pro ne Husky H4860HSG

Žádné komentáře